SP- HAND ROLL

Standard use with hand roll Stretch film wrapping

Physical and mechanical properties*	STANDARD	M.D	U.M.↓	T.D →	TOLERANCE
Yield tensile stress	ASTM D882-88	N/mm2	6.9	7.9	5%
Tensile stress at break	ASTM D882-88	N/mm2	35	26	5%
Elongation at break	ASTM D882-88	%	420	835	5%
Puncture elongation	METHOD DOW	mm	85	85	10%
Tear resistance	ASTM D1922-67	mN	90	300	10%
Impact resistance	ASTM D1709-75	g	140	140	10%
Guaranteed prestretch	METHOD SAPIR PLASTIC	%	100

* All above data refer to the following conditions:

- Thickness: 23 micron.

- Temperature: 20 c

The information appearing in this technical specification reference is accurate according to quality tests that were done by us in the plant. Since various factors may influence that technical data, the above specifications don’t carry any legal obligation or liability. The customer/user must check the data in the above specification reference in order to achieve the best results.